It’s official – my entire house now uses 3D printed light covers!
If you follow this blog you may have seen some of my previous indoor light covers, featuring a 3D scanned sea urchin shell and a pineapple. Of course, I couldn’t stop with indoor lights, especially since the outdoor wall-mounted lights on my house looked like the cheapest fittings available. They were desperately in need of an upgrade.
Luckily the fitting includes a piece that is easily unscrewed to accommodate standard DIY light covers. A few simple measurements, including the diameter of the fitting and distance of the protruding light bulb, meant that I had everything needed to create my own design in CAD. For this one I decided to use Fusion 360, just to keep my skills up as I’ve done a few projects in Solidworks recently. The only other limitation was the size of the Prusa MK3S+ build volume (250 x 210 x 210mm), as I wanted the light cover to be 3D printable in a single piece.
Putting all of this information in Fusion 360 gave me a starting point, and of course I began experimenting with a few simple ideas. The one that stuck was this collection of lofts that twist in different directions. Not overly complex, just a clean design that is easy to clean (a complex lattice would just invite spiders!) and protects the lightbulb from sun/rain. Because these are mounted quite high on the walls, what I really wanted was a cool effect when you are looking directly up at the light from below – see the top right image.
Something else I experimented with for the first time with this design was 3D printing using PETG filament – specifically, PETG from eSun. Why? Mainly because PETG has good UV stability so should last while out in the elements and sunshine. But what I’ve really enjoyed is how easy it is to print with – no warping, good adhesion to the build platform and no smelly fumes while printing. Happy days! I actually used the default PETG settings in PrusaSlicer and they seem to be dialled in nicely (no surprises really, thanks Prusa). The material also has a translucency, so the light shade has a bit of a glow when the light is on as you can see in the photos. If you’re looking for more details about the material properties and slicing settings for PETG, this article is a good starting point.
Happy 3D printing.
– Posted by James Novak