Even a beginner can master 3D printing technology. Nevertheless, making your first products can be very nerve-racking. Fortunately, the simple controls, detailed instructions, and recommendations on the Internet will allow anyone to understand almost any printer model. And the following tips-hacks will help you avoid typical beginner’s mistakes:

📌 Calibrate and test your 3D printer before you start;
📌 Watch out for the correct file extension for quality printing;
📌 Please do not take the finished product out of the printer immediately after processing it: this can damage the part and provoke defects;
📌 Try restarting the device if errors occur during the 3D printing (this usually helps);
📌 If restarting the printer does not help, try changing the settings or re-entering the model;
📌 When assembling 3D printing devices, follow the attached instructions;
📌 Use only the appropriate materials for your 3D printer;
📌 Subscribe to proper 3D printing channels and read articles.

Following the above tips will allow you to set up your 3D printer, prepare it for operation, and, most importantly, print your first 3D products. Then, choose a model according to your budget and capabilities. It will be easy to learn the basics of 3D modeling and get your first parts if you follow the instructions and recommendations in this article.

Writer
Christine Tomas is a tech expert, consultant, and aspiring writer. She writes for different news portals and thematic blogs for tech experts that helps her stay at the heart of programming, technology news.